Are you using the best engine oil?

Do you always use the best engine oil? What about your car’s tires, do you make sure they are properly inflated and rotated every few thousand miles? You might not know it but these two things can determine how long your vehicle lasts. The same is true with the synthetic motor oil we put in our vehicles. It has a huge impact on fuel economy, emissions and wear on parts like pistons. In this blog post I’ll tell you all about why using the right type of engine oil is important as well as what to look for when buying an engine oil that will keep your car running efficiently for years to come!

What is engine oil and why do I need it?

Engine oil is a liquid that lubricates the engine, cools it down and keeps dirt particles from damaging parts like pistons. For older vehicles you need to check your owner’s manual for your specific vehicle but most cars call for synthetic motor oil with an API certification of SG or higher. The first number represents how cold the engine can be before the oil starts losing its ability to keep things lubed up while the second letter tells us how well this type of motor oil performs in extreme heat (the bigger the better). If you are still unsure what kind of engine/transmission fluid you should use then just ask someone at an auto shop!

The best engine oils for your vehicle

There are a lot of different engine oils on the market and each one is going to have it’s own pros or cons. Engine oil isn’t something that you want to skimp out on, but there really isn’t any need for super expensive oil either. There are certain key factors when looking at an engine oil which I will outline below:

— Cold weather performance (the colder your climate is).

— High heat protection (how well does this type of motor oil perform in extremely hot climates like Death Valley?).

— Engine wear/protection against damage from friction (does this help minimize how much my car burns through its pistons over time? Will it keep them clean so they don’t rust?).

Engine Oil 10w40

All of these factors are important when determining the best engine oil for your car, but you need to decide which one is most important. If you live in a climate that doesn’t get very cold then Engine Oil SAE30 or Engine Oil 0w40 might be good enough for you! Engine Oil 30 weight can also be used by newer cars with more advanced technology built into them so if you have an older model vehicle it’s better to stick with this kind of motor oil since it won’t damage anything else inside the engine bay.

If your car gets up around 200 degrees Fahrenheit on a daily basis then Engine Oil 40weight would be ideal because it has high heat protection and will keep friction from damaging parts like pistons over time.

Why synthetic oil is better than mineral-based oils

Synthetic motor oil is much better for your car than mineral-based oils because it has superior protection against high heat. Engine Oil SAE30 or Engine Oil 0w40 are both synthetic oils which means they have additives inside of them that prevent the engine from overheating. Synthetics also last longer, so you don’t need to change your oil as often!

Another benefit to using synthetic oils instead of regular ones is how well they protect parts like pistons and other components in the vehicle.

How to change the oil in your car

There are a few different ways that you can change your oil but the most common way is to take it to an auto mechanic shop. They will drain all of the old Engine Oil SAE30 or Engine Oil 0w40 out and put in fresh synthetic motor oil at your request (if there isn’t already some inside).

If you are changing the oil on your own then Engine Oil 30 weight is usually pretty easy to do with most vehicles. You want to make sure that you get all of the old Engine Oil SAE30 or Engine Oil 0w40 out before adding in fresh synthetic motor oil though!

Changing Engine Oil 40weight can be a little bit trickier because it has high heat resistance and tends to clog up small filters inside an engine, so it’s important for mechanics (or yourself) to remove these filters prior to filling up any engines with this type of motor oil.

Assuming everything goes well when draining/filling your car with Engine Oil 30 weight or Engine Oil 40weight, how often should you change them?

When should you change the oil in your car

Typically Engine Oil 30 weight and Engine Oil 40weight should be changed every 3000–5000 miles, but this all depends on the type of vehicle you have. Some vehicles will need to replace their engine oil much more often than others especially if they use a lot of friction in their pistons or engine parts!

If your car isn’t doing anything special then it can typically go about 5000–6000 miles before needing an Engine Oil SAE30 or Engine Oil 0w40 change.

In conclusion: Let’s take a look at why engine oil is so important. First, it has a huge impact on fuel economy and emissions because there are fewer moving parts in an engine that need to work as hard when the right type of synthetic motor oil is being used. Second, using the wrong type of engine oil can cause premature wear on pistons and other parts by not providing enough lubrication for them. Finally, your car may be less responsive to acceleration if you’re running low on engine oil!